Home > Double Rotor Rotary Rakes
Rotary Rake   |   Pruning rake   |   Hay tedder   |   Fertilizer spreader   |   Drills trips
  The company  
  Products  
     
    Pruning rake  
    Hay tedder  
    Fertilizer spreader  
    Drills trips  
  Our strength  
  Info & News  
  Contact  
  Download  
  Site Map  
 
Butterfly Butterfly Avantime Borello 6810-7810-8610 Borello Twin Side
    DOUBLE ROTOR ROTARY RAKES  
 

BUTTERFLY AVANTIME

     
 

The new rake of the Butterfly series combines the well-known advantages offered by the half-carried rake with central swath with a lighter weight and great handiness both at work and during transportation.
It is hooked to the front lift three-point linkage of the tractor hitch. Being carried, it demands a tractor able to hoist 1500 kgs.
Working width can be adjusted manually on the extractable arms in order to adapt the rake to the cutting bar width. Ideal to make forage swaths in general, but especially of alfalfa immediately after harvesting to form a soft and perfectly symmetrical swath.
After road transportation the operator does not need to get off the tractor to start working.
The machine is ready for use: just release the safety devices of the hydraulic hoisting cylinders from the driver's seat and lower the rotors to start working.
The correct working position and machine balance are found by adjusting the height of the tractor hoisting device and the third point position in order to let the teeth pass just over the ground. During the maneuvers at field head just lift both rotors without modifying the height of the hoisting device.
You will always obtain homogeneous adjustments.
The gearboxes in oil bath are maintenance-free.
The axles with four pivoting wheels adapt to the ground very well.

   
     
 
TECHNICAL FEATURES
AVANTIME
• Swath formation
central
• Rotor height adjustment
manual
• Number of gearboxes in oil bath
2
• Rotor diameter
3.00 m cad.
• Working width with swath
6.00 m - 6.50 m
• Number of extractable fork arms
9 × 2
• Number of forks (spring teeth) per arm
4
• Tractor hitch
front lift
• Number of pivoting wheels each rotor
4 × 15 × 6.00 - 6
• Tandem axles
standard
• Width in transport position
2.50 m
• Total length (transport position)
4.00 m
• Weight with transmission
1150 kg
• Transmission with PTO shaft and fifth wheel
1
• Secondary transmission with PTO shaft and clutch
2
• Required power (starting from)
110/80 Cv/Kw
 
   
 
  Photo gallery Specification enquiry PDF Download Print  
    Abimac s.r.l.